Write 6 pages with APA style on Engine Practical Workshop: Engine Disassembly. The setscrews securing the radiator the stabilizer to the radiator frame were removed.
The earth cable was removed from the batteries. The alternator air cooling cover was removed. The wiring from the alternator was disconnected. The V-belt tension was slackened, the radiator bracket was removed and the V-belts removed by pulling them over the fan blades the V-belts were checked. The alternator was removed. Reinstallation was the opposite of the removal procedure. The V-belts were tensioned. The wiring was reconnected and the alternator air cooling cover was refitted. The earth cables were reconnected to the batteries.
The air inlet pipe was removed from the compressor. The lubricating oil supply pipe was removed. The air supply pipe was disconnected from the governor and the two brackets removed from the cylinder block. The steering pump was removed. The bolts by which the compressor was attached to the timing case were removed. The compressor with the governor supply pipe from the engine was removed the governor supply was checked for carbon deposits.
The engine oil was drained into suitable containers. The bolts and setscrews securing the starter motor front mounting bracket to the sump were removed. The turbocharger oil was drained at the sump. The dipstick was withdrawn and the dipstick tube disconnected from the sump.
The front timing cover was removed. The engine was turned until timing mark on the camshaft gear aligned with the timing mark on the backplate. The fuel pump drive coupling was suitably marked in relation to the timing pointer. The back tab of the tab washer was knocked then the bolt removed securing camshaft drive gear to the camshaft. The camshaft gear was withdrawn.
The clutch was removed. The back tabs of lock plates were knocked then the setscrews securing flywheel to crankshaft adapter was removed. Using suitable jacking bolts the flywheel was withdrawn from the crankshaft adapter.